Finding the best cheap plasma cutter doesn’t have to give you a headache. If you work with metal or machinery you might require a plasma cutter. Depending on the strength and the size of the plasma cutter you can cut through a whole plethora of metals.
Below we have given you a quick rundown of 7 of the best cheap plasma cutters. With the information you gather you can be sure that you are making a wise purchase.
JEGS 81545 Plasma Cutter 20-40 Amp 110/220VAC Cuts Steel/Iron up to 3/8″ Thick
The Jegs plasma cutter is one of the least expensive quality cutters we could find. It provides adequate cutting power up to 3/8″ thick metal. The Jegs 81545 Plasma Cutter also works with your standard 110V to 220v power source.
This device uses compressed air and 30-amp output at a maximum 60% duty cycle. Included with this plasma cutter is a power cable, plasma cutting torch, ground cable, plug adapter, hand held mask and a wire brush. You have everything you need to start cutting through steel and iron.
Specs
- 110VAC/220VAC
- 26.5 lbs
60%@30A - Cuts Steel/Iron up to 3/8″ Thick
- Create clean, precise & intricate cuts in many forms of steel and iron up to 3/8 in. thick
- Built-in moisture separator
- Works virtually anywhere with any 110V or 220V outlet
- Significantly faster than other forms of cutting
- Makes curved or intricate cuts more precisely
- Solid-state electronics
- Sturdy metal cabinet
- 1 Year Warranty
Lotos LTP5000D Plasma Cutter
Next on our list is the Lotos LTP 5000D Plasma Cutter. If you are looking for an easy to use Plasma Cutter under $500 this is a good choice. This a non-touch pilot arc plasma cutter. This means that it can cleanly cut through material that is painted, rusted and with minimal slag.
The Lotos LTP5000D Plasma Cutter allows for a 110/120 & 220/240 volt input. It operates at up to 50 amps with 60% duty cycle. The machine is compact so you can use it in small spaces.
You can use compressed air to cut through multiple metals with up to 3/4″ thickness. Whether you are cutting stainless steel, alloy steel, mild steel, copper or aluminum this plasma cutter will get the job done.
Specs
- Non-touch pilot arc
- 13’ torch lead
- Clean cut up to 1/2″
- Max 3/4” cut
- Compact design – 15” x 6” x 12”
- One-year warranty
- Weighs 26 pounds
- Standoff application
- Includes air filter regulator
- 110/120 & 220/240 volt input
- Up to 50 amps with 60% duty cycle
Forney Easy Weld 251 20 P Plasma Cutter,Green
Next on our list of the best cheap plasma cutter is the Forney Easy Weld 251 20 P Plasma Cutter. The Forney Easy Weld cuts through mild steel, aluminum and stainless steel up to 1/4″ thick.
This plasma cutter runs on a 120v input. In addition it only requires 1.5 CFM of compressed air to operate. With the built in regultor and air dryer this plasma cutter offers you a problem free experience.
The drag torch technology allows you to drag the torch along the metal for clean cuts. It’s by far easier to follow a line when you are touching the material. Whether you are working at home or on the go the plasma cutter is extremely portable. It only requires 120v so you can plug it up to a generator and cut on the go.
This cutter includes a 13′ cutting torch, 8′ ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty. There are attachments available so you can customize the device to suit your needs.
Specs
- Drag Torch Technology
- 13′ cutting torch
- 1/4″ cutting capacity
- 8′ ground clamp
- 20A-15A adapter. Extension cord friendly: #12 AWG or larger (up to 25 ft. (8m))
- 1 additional electrode and 1 additional nozzle
- Generator friendly (minimum rated continuous output 4500W)
- 110/120 volt input
SUNGOLDPOWER 50A Air Plasma Cutter
If you are cutting metal in a shop or in a garage the SUNGOLDPOWER 50A Air Plasma Cutter would be a good choice. It’s one of the least expensive cheap plasma cutters on our list.
This cheap plasma cutter can cut up to 3/4″ thick metal. Although if you are looking for a cleaner cut you may want to stick to 1/2″ and below. It runs on compressed air and allows for a 120v or a 220v power in put.
This low budget plasma cutter is perfect for the DIY’er. If you don’t want to have a 220v power source installed your can use the supplied adapter. Plug your machine into any US 120v plug.
With the included LCD screen you can see the stats on the incoming compressed air. You can adjust the current to fit your needs. The Sungoldpower 50A Plasma Cutter is suitable for cutting Stainless steel, copper, iron, aluminum and other metal materials
Specs
- Model: CUT-50
- Power supply voltage:AC 110±15%/AC 220±15 – frequency: 50-60Hz
- Power supply capacity: 6.4 kVA
- Rated input current: 27A / No-load voltage: 210 V
- Output current range: 10-50A / Output voltage: 100V
- Duty cycle: 60% / Input Air Pressure:<0.3MPA
- Max Cutting Thickness: 1/2” ideal clean cut and 3/4” severance
- Insulation grade: F / Protection grade: IP 21 S
- Net Weight: 23.9lbs / Dimensions (inch): 19”10”16”
SUPER DEAL CUT 50 Plasma Cutter
The SUPER DEAL DC Inverter Plasma Cutter is a good plasma cutter work horse. It can make clean cuts with 1/2″ thick metal. It offers high duty results with less power consumption.
Made of iron this cheap plasma cutter is perfect for any garage or shop. It accommodates the needs of DIY’er and professionals. The Super Deal works with 110v or 220v power input. This means you can plug it in at home without having to install a 220v receptacle.
This unit uses compressed air to cut through electrically conductive materials such as steel, stainless steel, copper, aluminum, brass and more up to a 1/2 in. thick. It also has heat safety protection so prevent overheating.
Specs
- Cuts rusty/painted metal
- Drag torch technology
- Compact design – 5” x 11” x 13.5”
- 110/120 & 220/240 volt input
- Up to 50-amp output
- Weighs 24.4 pounds
- One-year warranty
HITBOX 40A 220V Plasma-Cutter Machine
Last but not least is the HITBOX 40A 220V Plasma-Cutter Machine. It is a budget friendly cheap plasma cutter. Even though it’s last on the list it provides optimal performance to get the job done.
The Hitbox 40A has a cutting thickness of 16mm. Although it cuts the cleanest at 12mm. A 220v input source is required. If you don’t have a 220v outlet you would have to get one installed.
A compressed air regulator is included with this plasma cutter. There is an LCD screen which clearly shows you the information you need. There is a built in carrying handle so you can transport this machine where you need it.
The Hitbox comes with a 1 year warranty so you can have piece of mind that it will meet whatever needs you have.
Specs
- Input Voltage (V):220±15%
- Input Frequency (Hz): 50/60
- Rate power(KVA): 6.0
- No load loss(W): 45
- Duty cycle(%)@25ºC: 70
- Power factor: 0.85
- Efficiency(%): 85
- Insulation class: B
- Protection class: IP23
- Plasma Arc Starting: Touch
- Cutting thickness(mm): 16mm (75 psi)
- Air flow rate(CFM): 6.5
- Output Current Range(A): 10-50A
In Closing
If you are looking for a the best cheap plasma cutter you can’t go wrong with these choices. Depending on your application different cutters cut different materials based on their thickness. Whether you are a full time metal worker or just have a few projects on the side get yourself one of these plasma cutters under $500.